Undercoat Pro is an acryl-polyurethane undercoat with the characteristics of a filling undercoat or an undercoat enamel according to the dilution. It can boast an outstanding adhesion on both epoxy and polyester products like well-seasoned gelcoat. Undercoat Pro has a high dry residue and it is available in two colours (white and black) that can be mixed to obtain various shades of grey, facilitating further coatings with products with little covering properties. It has a semi-glossy finish which accentuates the preparation of the surface, as well as excellent response to sanding. It is recommended to use it as an undercoat because it makes the following finishes stand out.
Undercoats
UNDERCOAT PRO
ACRYL-POLYURETHANIC UNDERCOAT
COLOURS
| 2,5 l | |||||
|---|---|---|---|---|---|
| 001 | White |  | |||
| 051 | Grey |  | |||
| Composition | |||||
| Component A | 2000 ml | ||||
| Component B | 500 ml | ||||
Technical specifications
| Theorical coverage | 4 - 6 m²/l |
| 2nd coat min/max | 30 - 120 min wet on wet (20°C) |
| Sanding | 24 h (20°C) |
| Pot ife | 90 min (20°C) |
| Catalysys volume ratio | 4:1 |
| Spray thinner and % dilution | P698 | 15-25% 5-15% |
| Brush/Roller thinner and % dilution | - |
APPLICATION
Documents download
Boero Bartolomeo S.p.A.Company subject to the Direction and Administration of CIN –
CORPORAÇÃO INDUSTRIAL DO NORTE, S.A.
Legal head office in Genova, Via Macaggi 19
VAT number 00267120103
